Kenmore Refrigerator Ice Maker On Off Switch [SOLVED]

The ice maker on/off switch on a Kenmore refrigerator is a simple but important feature. It allows you to turn the ice maker on and off as needed, which can save energy and help prevent ice buildup.

The location of the ice maker on/off switch on a Kenmore refrigerator varies depending on the model.

For newer models with the ice maker in the door, the switch is typically located in the upper left-hand corner, behind the ice bucket. To access the switch, you may need to remove the ice bucket first.

For side-by-side models with the ice maker on the top of the freezer, the on/off switch is usually located underneath the ice maker itself. To access the switch, you may need to remove the ice bin and shelf.

If you cannot find the ice maker on/off switch on your Kenmore refrigerator, consult your owner’s manual for assistance.

Table of Contents

Kenmore Refrigerator Ice Maker On Off Switch

The ice maker on/off switch in a Kenmore refrigerator allows you to control the ice-making process with ease. It provides a convenient way to pause or resume ice production, ensuring that you have a steady supply of ice whenever required.

Locating ice maker on/off switch

The location of the ice maker on/off switch on a Kenmore refrigerator will vary depending on the model. However, it is typically located on the ice maker itself or on the refrigerator’s control panel.

If your Kenmore refrigerator has an ice maker in the door, the on/off switch is typically located on the upper left-hand side of the ice maker compartment. You may need to remove the ice bucket to access the switch.
If your Kenmore refrigerator has a side-by-side design, the ice maker on/off switch is typically located on the underside of the ice maker compartment. You may need to remove a shelf or two to access the switch.
If you can’t find the ice maker on/off switch on the ice maker itself, it may be located on the refrigerator’s control panel. This is more common on newer models.

Bonus Tips

Here are some general tips for finding the ice maker on/off switch on a Kenmore refrigerator:

Look for a small rocker switch or button labeled “Ice Maker On/Off” or simply “Ice.”
Check the upper left-hand corner of the ice maker compartment, behind the ice bucket.
Look underneath the ice maker in the freezer.
Consult your owner’s manual for specific instructions.

Once you have found the ice maker on/off switch, simply flip it to the “On” position to turn on the ice maker, or to the “Off” position to turn it off.

Please note: Some Kenmore refrigerators may not have a physical ice maker on/off switch. Instead, you may be able to control the ice maker using the refrigerator’s control panel. Consult your owner’s manual for more information.

Using The Ice Maker On/Off Switch

Tips for using the ice maker on/off switch on a Kenmore refrigerator

Make sure to turn the ice maker back on before you need ice. It can take up to 24 hours for the ice maker to produce a full bucket of ice after it is turned on.
If you are going to be turning the ice maker off for an extended period of time, be sure to drain the ice maker reservoir first. This will help prevent mold and mildew from growing in the reservoir.
If you are having problems with the ice maker, consult your Kenmore refrigerator’s owner’s manual for troubleshooting tips.

By following these tips, you can use the ice maker on/off switch on your Kenmore refrigerator to save energy, prolong the life of the ice maker, and ensure that you always have a fresh supply of ice on hand.

Reset Kenmore Refrigerator Ice Maker

To reset a Kenmore refrigerator ice maker, follow these steps:

Turn off the ice maker. This is usually done by toggling the ice maker on/off switch to the “off” position. If you can’t find the ice maker on/off switch, unplug the refrigerator from the wall outlet.
Wait at least 30 seconds. This allows the ice maker’s internal components to reset.
Turn the ice maker back on. If you unplugged the refrigerator, plug it back in first.
Press and hold the ice maker test button for 3 seconds. This is usually located on the ice maker itself, but it may also be located on the refrigerator’s control panel.
Release the test button. The ice maker should begin a harvest cycle.

If the ice maker does not begin a harvest cycle, try the following:

Make sure that the ice bucket is properly installed.
Check the water supply to the ice maker. Make sure that the water valve is turned on and that there is enough water pressure.
Clean the ice maker. Wipe down the interior of the ice maker with a damp cloth and remove any ice that may have accumulated.

If you’ve tried all of the above and the ice maker is still not working, you may need to contact a qualified appliance repair technician for assistance.

Bonus Tips:

Some Kenmore refrigerator models do not have a test button. If your model doesn’t have a test button, simply pressing and holding the ice maker on/off switch for 3 seconds should reset the ice maker.
If your ice maker is still not working after resetting it, try unplugging the refrigerator for 2 minutes and then plugging it back in.
If you’re still having trouble, consult your Kenmore refrigerator’s owner’s manual for troubleshooting tips or contact Kenmore customer support for assistance.

Kenmore Refrigerator Ice Maker Is Not Working

If your Kenmore refrigerator ice maker is not working, there are several things you can do to troubleshoot the issue:

Check the ice maker’s ON/OFF switch.

Depending on the model of your Kenmore refrigerator, the switch may be located in different places. Look for the switch on the ice maker itself or in the refrigerator near the ice maker. If the switch is in the “off” position, turn it to “on” and wait 24 hours to see if that fixes the problem

Check the water supply to the ice maker.

Make sure the water shut-off valve behind the refrigerator is in the “on” position. If it is in the “off” position, turn it to “on” and wait 24 hours to see if that fixes the problem[1].

Check the water inlet valve.

If the valve is defective or has insufficient pressure, it won’t allow water to flow through, and the ice maker won’t make ice. You can inspect the valve for signs of damage or use a multimeter to determine if a voltage is reaching the ice maker after reviewing the refrigerator’s wiring diagram

Check the main control board.

The control board controls the voltage being sent to the ice maker. If the control board is defective, the ice maker may not work at all. You can inspect the board for signs of damage or a shorted component, or use a multimeter to determine if voltage is reaching the ice maker after reviewing the refrigerator’s wiring diagram

Reset the ice maker.

Some Kenmore models have a reset button underneath the ice maker. Press and hold the button until the tray starts to move, then release. Wait 24 hours to see if that fixes the problem

Unplug the refrigerator.

Unplug the refrigerator and wait two minutes before plugging it back in. This can reset the ice maker and fix any issues

Check the temperature.

If the temperature becomes too high, the ice maker can fail to generate ice. Make sure the thermostat temperature is lower than 20 degrees Fahrenheit

Tips for maintaining your Kenmore refrigerator ice maker

Clean the ice maker regularly.

Wipe down the interior of the ice maker with a damp cloth and remove any ice buildup.

You can also use a vinegar solution to clean the ice maker. Mix equal parts vinegar and water and pour it into the ice maker reservoir.

Let the solution sit for 30 minutes, then drain it and rinse the reservoir with clean water.

Check the water supply to the ice maker regularly.

Make sure that the water valve is turned on and that there is enough water pressure.

Defrost the freezer regularly. Ice buildup in the freezer can prevent the ice maker from working properly.

By following these tips, you can help to keep your Kenmore refrigerator ice maker working properly for many years to come.

Conclusion

The location of the ice maker on/off switch in a Kenmore refrigerator varies depending on the model.

For refrigerators with an ice maker in the door, the switch is typically found on the upper left-hand side of the ice maker compartment.

To access the switch, you may need to remove the ice bucket. In side-by-side models, the switch is usually located underneath the ice maker compartment, requiring the removal of shelves for access.

If the switch is not on the ice maker itself, it may be located on the control panel of newer models.